Waterway In-Line filter

The Waterway In-Line filter has a built-in spring actuated by-pass which allows 100% filtration of the water on low speed of two speed pumps. During high speed operation, the spring opens, permitting unrestricted flow and maximum hydrotherapy action.

Installation : The filter must be installed on the pressure side of the filtration pump with flow arrow on bottom manifold pointing in direction of water flow.

Below you will find an exploded view of the Waterway In-Line filter for PRB25 and PRB50, to make the search for its components easier. The numbered parts correspond to the parts listed below.

Waterway air-bleed valve plug
2. Air-bleed valve plug
In stock
Waterway Top-Load spacer ring
4. Skimmer spacer ring
In stock
Filter lid o-ring
5. Filter lid o-ring
In stock
PRB25-IN filter
6a. PRB25-IN
2 weeks
PRB50-IN filter
6b. PRB50-IN
In stock
Waterway 1,5" Bypass valve
7. 1,5" Bypass valve
In stock
62 mm pump union for 1.5" pipe
62 mm nut, 1.5" exit
In stock
62 mm pump union for 50 mm pipe
62 mm nut, 50 mm exit
4 weeks