Gecko Waterlab multiparameter probe
This probe is used with the Gecko Waterlab system to automatically monitor the water quality of a spa. It continuously measures three essential parameters: pH, oxidation-reduction potential (ORP), and temperature. The data is transmitted via the in.touch 3+ module to the Gecko Smart Spa Control mobile app.
Installed in the Waterlab chamber (sold separately), the probe is mounted in a bypass line connected to the spa’s filtration system. This setup ensures accurate and stable readings, free from disturbances caused by water turbulence or chemical treatments in the main circuit.
The probe simply screws into the chamber, which is installed under the spa shell. Maintenance is minimal: regular inspection and gentle cleaning of the electrodes are sufficient to maintain measurement accuracy. Replacement is straightforward and does not require draining the spa, depending on the installation.
Compatibility
The probe is designed to work exclusively with the Gecko Waterlab system. It must be used with the Waterlab chamber, the in.touch 3+ module, and a compatible Gecko control system in.ye or in.yt.
Maintenance
The probe is designed to last up to 4 years without replacement after a single initial calibration. Periodic checks of the electrode condition and light cleaning are recommended if buildup occurs. Recalibration is advised every 2 years if readings become unstable. In the event of a malfunction, the probe can be easily replaced without draining the spa.
Part numbers
Gecko: 9960-400001
