Ondilo ICO Redox sensor
This Redox (ORP) sensor is a spare part for the ICO Spa 5V1 and V2) and ICO Pool, connected devices to monitor your hot tub and pool water. It measures the ORP (Oxidation-Reduction Potential), which is a close proxy for the amount of free chlorine or bromine in the water.
In addition to the sensor, the pack contains:
- 1 ORP 470 mV buffer solution
- 1 ICO calibration stand
- 1 calibration & sensor replacement guide
- 1 free ORP calibration kit
Thanks to the Twist & Lock system, the sensor is easily replaceable with a sensor remplacement tool. The protecting cap is included with the sensor.
We also offer a kit for ICO Spa and ICO Pool used with salt water.
This orange sensor is also a spare part of BWT Pearl Water Manager and Wellis W.I.S. connected water analyzers.
Dimensions
Length : 95 mm
Sensor maintenance
Ondilo recommends that you clean the 3 sensors (orange, blue and grey) once a month. Remove ICO out of the water, take the protection hood off and clean the sensors with a damp and non-abrasive cloth. Replace the hood put the ICO back into your hot tub.
After the first season, we recommend that you recalibrate the sensors each time you restart your pool or spa (or every 6 months if you do not winterize) or if you notice a drift in the measurements.
Warranty
2 years, provided directly by Ondilo
For all technical questions or after sales service, we invite you to contact the Ondilo manufacturer at first, using either the website (www.ondilo.com) and selecting the "Assistance" tab, or the Ondilo’s hotline available every day from Monday to Friday on +44 1490 340 188 (non-surcharged landline number). Before any contact, have your UUID number ready (available in the settings section of your ICO application or inside your ICO box).
