HydroAir Genesis 900W heated blower

The HydroAir hot air blower is used by several portable hot tub brands, and is a suitable replacement part for almost any spa. It is a 900W blower with a 250W air heater.

If your old blower died because water got into it then check that the one-way valve on the air line is working correctly before installing a new one!

We also find that blower in the conception of concrete spas

Dimensions
Length: 275 mm
Width: 175 mm
Height: 180 mm

Power
Blower: 900W
Heater: 250W

Connection
The blower comes with a union for 32 mm pipe. You can also choose a 1-inch pipe union.

Air flow rate
See the performance curve on this page.

Cable and plug
This blower is available pre-wired without a plug or with a AMP plug.

Installations equipped with a mini J&J plug must select the AMP plug option and use a adapter from AMP to mini J&J (sold separately), or reuse the cable from their existing pump if it is in good condition.

Warranty
2-year Tubs Parts warranty

Note that the 2-year warranty does not apply to the carbon brush, also known as a motor brush, a graphite bonding agent that conducts the electrical current between stationary and rotating wires inside the motor. The carbon brush is a wearing part with a life expectancy of approximately 1500 hours.

Part numbers
HydroAir: G90-2HN-S
Spaform: GB90-2HJ-B