HydroAir HA460 centre suction pump
The HydroAir HA460 centre suction pump is a powerful, yet quiet pump used by many spa manufacturers and offering excellent performance. This is a single-speed pump, used to operate massage jets in spas and on swimming-pools. It also has a self drain wet end.
This pump has an integrated air switch. If you don't know what this means, then you almost certainly need the version WITHOUT an air switch.
The wet end seal (part number PS-1000) is available as a spare part.
Dimensions
Length: 330 mm
Width: 170 mm
Height: 207 mm
Technical specification
Power: 1.3 kW (1.7 HP)
Pipe connections
Male thread (1.5-inch MBT) with a 62 mm outside diameter.
This pump is delivered without unions. We offer 1.5-inch pump unions.
Cable and plug
The HydroAir HA460 centre suction pump pump is delivered pre-cabled without plug (length 200 cm). If you are replacing an existing pump, you may be able to re-use your existing plug. There is a wiring diagram for connecting it up on the inside of the cover of the water-resistant electrical box.
You can also choose to have the pump pre-cabled by our team with an AMP plug or a mini J&J plug.
An in.link plug (220 cm long) is also available, but we recommend that you keep your existing cable if it's in good condition. Your pump may indeed be defective for many reasons, but the power cable is rarely to blame.
Warranty
2-year Tubs Parts warranty
HydroAir part numbers
Standard version: 22-4667 (replaces 21-4655 and 21-4667)
Pneumatically-controlled: 22-46671 (replaces 21-46551 and 21-46671)
Plug types
AMP plug
J&J plug
in.link plug