Waterway Top-Load filter

Many Waterway's Top-Load filters have a built-in by-pass which is spring-activated and allows 100% water filtration on the low speed of two speed pumps. When the pump is running on high speed, the spring opens, allowing unrestricted flow and maximum hydrotherapy action.

The filter must be installed on the pressure side of the filtration pump with the flow arrow on bottom manifold pointing in the direction of water flow.

Below you will find an exploded view of the Waterway Top-Load filter for CRB25, CRB50 and PCAL100 (compatible with the Top-Load Extended filter), to make the search for its components easier. The numbered parts correspond to the parts listed below.

Waterway air-bleed valve plug
2. Air-bleed valve plug
 3,70€ 
In stock
Waterway Top-Load filter lid with handle
4. Filter lid with handle
 33,00€ 
In stock
Filter lid o-ring
5. Filter lid o-ring
 2,95€ 
In stock
Waterway Top-Load spacer ring
8. Skimmer spacer ring
 4,50€ 
In stock
Claralys CRB25 filter
9a. CRB25
 33,60€ 
In stock
Claralys CRB50 filter
9b. CRB50
 38,40€ 
In stock
PCAL100 filter
9c. PCAL100
 65,00€ 
In stock
Waterway Top-Load filter body nut
10. Top-Load filter body nut
 17,00€ 
In stock
Waterway 1,5" Bypass valve
11. 1,5" Bypass valve
 15,00€ 
In stock
Waterway Top-Load filter with Bypass
Top-Load filter with Bypass
 219,00€ 
In stock
Waterway bypass valve assembly
Bypass valve assembly
 9,00€ 
In stock
Waterway filter niche
Filter niche
 38,00€ 
In stock
Basket clip for Ultra Skim Filter
Basket clip for Ultra Skim Filter
 3,00€ 
Lead time uncertain
Waterway filter mount base
Filter mount base
 17,40€ 
In stock