Waterway In-Line filter

The Waterway In-Line filter has a built-in by-pass which is spring-activated and allows 100% water filtration on low speed of two speed pumps. When the pump is running on high speed, the spring opens, permitting unrestricted flow and maximum hydrotherapy action.

The filter must be installed on the pressure side of the filtration pump with the flow arrow on the bottom manifold pointing in the direction of water flow.

Below you will find an exploded view of the Waterway In-Line filter for CRB25 and CRB50, to make the search for its components easier. The numbered parts correspond to the parts listed below.

Waterway air-bleed valve plug
2. Air-bleed valve plug
 3,70€ 
In stock
Waterway Top-Load spacer ring
4. Skimmer spacer ring
 4,50€ 
In stock
Filter lid o-ring
5. Filter lid o-ring
 2,95€ 
In stock
Claralys CRB25 filter
6a. CRB25
 33,60€ 
In stock
Claralys CRB50 filter
6b. CRB50
 38,40€ 
In stock
Waterway 1,5" Bypass valve
7. 1,5" Bypass valve
 15,00€ 
In stock
62 mm pump union for 1.5" pipe
62 mm nut, 1.5" exit
 6,90€ 
In stock
62 mm pump union for 50 mm pipe
62 mm nut, 50 mm exit
 7,74€ 
In stock