Pre-filter for hard water Spa Pure Fill

The Spa Pure Fill helps to remove organic contaminants and metals, including iron and copper, from your water, before it’s introduced into your hot tub.

If you live in a hard water area, it can be a challenge to protect your spa from scale. Adding chemical sequestering agents can help, but that's just adding more chemicals to your hot tub. Spa Pure Fill is a pre-filter, made from a ion-exchange resin, which captures the calcium and other minerals and traps them in the filter before it reaches your hot tub. Less calcium in the water means no scale in your tub.

Especially effective in hard water areas. The Spa Pure Fill can be used with all conventional water treatments.

Spa Pure Fill fits on to the end of a garden hose and filters out the calcium in the water as it passes through the filter when filling the spa. The Spa Pure Fill should be effective for up to 6 fills (average 250 gallons per fill) for a maximum of 2 years.

Directions
Attach your garden hose to the filter using the adapter (supplied) and fill your spa using a slow to medium flow rate to gain maximum effect. The slower the water passes through the filter, the more calcium will be removed.

The filter needs to remain wet between uses, be sure to replace the end caps when you have finished filling the spa.

Part numbers
SPA Line : SPA-PURFL